SPLITING a NETGEAR RANGE EXTENDER

by mantis22 in Circuits > Wireless

864 Views, 13 Favorites, 0 Comments

SPLITING a NETGEAR RANGE EXTENDER

DSCN1863.JPG

GOT A NET ADAPTOR WITH OUT AN ANTENNA?

HAVE A NETGEAR RANGE EXTENDER?

CUT ONE ANTENNA OUT TO USE ON OTHER COMPUTER

TOOLS YOU WILL NEED

DSCN1864.JPG
DSCN1880.JPG
DSCN1871.JPG

1 STRAIT POKER
2 EXTO KNIF

3 SCISSOR

OPEN THE OUTER CASE

DSCN1864.JPG
DSCN1867.JPG
DSCN1868.JPG

WITH THE PRY TOOL INSERT AROUND SEAM

POP THE CLIPS AND YOUR IN

PULL THE BOARD OUT AND CUT THE PLASTIC OFF THE WIRES

DSCN1869.JPG
DSCN1872.JPG
DSCN1870.JPG
DSCN1871.JPG
DSCN1873.JPG
DSCN1874.JPG
DSCN1875.JPG

PULL THE BOARD OUT IT IS ON FOUR PEGS

NOW WITH YOUR EXATO KNIFE CARFULLY CUT THE PLASTIC STOPPER OF THE THREE WIRES WTH OUT CUTTING THE WIRES.

CUT OUT ONE ANTENNA

DSCN1880.JPG
DSCN1878.JPG
DSCN1877.JPG
DSCN1879.JPG

WITH THE SCICCORS CARFULLY CUT AROUND THE METAL OF THE ANTENNA

PULL WIRE APART

DSCN1876.JPG
DSCN1883.JPG

GRAB THE WIRE U WANT TO USE PULL IT APART

THEN PULL THE THREW THE HOLE OF THE PLASTIC CASE

PUT BACK THE BOARD

DSCN1886.JPG
DSCN1885.JPG

PUT THE BOARD BACK IN A SNAP THE CASE TOGEATHER

HOOK UP TO YOUR NET ADAPTOR

DSCN1887.JPG

SCEW TO NET ADAPTOR

YES FULL SIGNAL NOW ON BOTH MY COMPUTERS

THANK YOU..... NEW STORE OPENED FOR QUILITY USED GOODS CHECK ME OUT WWW.LANDFILLSAVERS.COM HOPE TO SEE U THERE