SINE WAVE INVERTER USING PIC MICROCONTROLLER
by kashifmirza4522 in Circuits > Microcontrollers
4449 Views, 0 Favorites, 0 Comments
SINE WAVE INVERTER USING PIC MICROCONTROLLER
Introduction:
In this project we discuss about “Pure Sine Wave Inverter”. This is a basic need of our daily life because normally used inverter in our daily life this is square wave output. We make pure sine wave inverter for better future and save our home appliances and good efficiency of inverter. In this pure sine wave inverter we use PIC Microcontroller (PIC 16F887) to make an efficient and low cost inverter. We also use a filter capacitor at transformer output for removing noise. We also checked pure Sine wave output on Oscilloscope.
Components List
1. Battery
12v
2. PIC Microcontroller
3. Regulator 7805
4. Capacitor
5. Diode
6. Resistor
7. LED
8. Level Converter (5v to 12v)
9. High Power FET Module
10. Step UP Transformer (12v to 220v)
11. AC filter Capacitor
12. AC Load (Bulb)
13. Soldering Iron
14. Solder Wire
15. Wiring Wire
for more details visit website