SIMPLE PLYWOOD SHELVES

Simple out of Plywood Shelves that helps to organize our place..

1. Plywood standard size 4ft X 8ft or 48 inches X 96 inches

2. Saw - I used reciprocating Saw

3. Nails - 1/12 inches and 2 inches and concrete nails to hang in the wall

4. Hammer

5. Paint Flat enamel and Gloss enamel

6. Pencil use for marking

7. Measuring toll/ steel tape

8. wood glue

9. stick to help for marking a line

10. sand paper

> 1st make a measurement on the plywood, its up to you what size/measurement do you want for your project for me I cut it into 10 inches wide X 96 inches Length. I make 4 pcs. 10 inches wide and 1 pc. 8 inches wide.

> 2nd i make a square frame that fits on the wall where i put the shelves.

> 3rd i just make my own design or free cut as long i make a square or divider there is no fixed measurement on my project it depends on my like to angle the plywood.

1st i paint if with Flat enamel so the paint will not absorb if i paint Gloss on the 2nd coating i did not paint at the back and on the right side coz it will see from that angle.

i just nailed it on the wall using concrete nail 4 inches long now its finished and very helpful to us to organized our thing...God bless us all