Ruler Bow

by genius kid in Outside > Launchers

3520 Views, 5 Favorites, 0 Comments

Ruler Bow

IMG_1385.JPG
make a bow that you can use to shoot stuff with this is my first Instructable so be as harsh as you want
note I am not responsible if you shoot someone's eye out or harm them or your self in any other way

Things Needed

IMG_1380.JPG
things needed
drill bit
ruler
rubber band
bamboo skewer
needle (optional)
tape
straw from MC Donalds
paper clips

Make Middle Hole Bigger

IMG_1383.JPG
take the drill bit and make the middle hole bigger in the ruler

Add the Rubberband

IMG_1382.JPG
make sure that only on side of the rubber band covers the hole you can also tape one side of the rubber ban

Ammo

take the bamboo skewer and cut it in half and then make a groove in it with a knife and put the needle in the groove and secure it with tape or you could take straw and put a paper clip on the end for weight

sorry there are not any pictures my my camera

Shooting

IMG_1385.JPG
IMG_1386.JPG
do I need to explain this