Rubber Band Toy Gun

This is a youtube video of a test and how to build it!

youtube

for this build you will need

-a 3/4 inch piece of wood

-a wooden rod

-chlotes pin

-jigsaw

-drill

-glue

In the first place draw and cut the shape of the gun

For the barrel take the same angle as on the body(shown on the picture) and cut the barrel so that it measures approximately 8 inch. Also make a small cut for the rubber.

Now it is time to glue allparts together as shown on the picture. You can add nail to make sure the barrel stay in position.

Now the rubber band gun is ready to use!! You can make biger gun and customize it as you want to make it longer and even with two barrels.