Rotisserie for a Weber Grill

by knife141 in Cooking > BBQ & Grilling

4699 Views, 7 Favorites, 0 Comments

Rotisserie for a Weber Grill

Imgp3883.jpg
Imgp3880.jpg
Imgp3877.jpg
Imgp3881.jpg
Imgp3884.jpg
A couple of years ago I bought a Weber grill, and have been really happy with it.  The only thing I have missed is having a rotisserie, which did not come with it.  I checked online and a rotisserie for this grill costs around $79-$89 plus shipping.  That just seemed a bit pricey to me.

One day at an estate sale I picked up a universal rotisserie  for a charcoal grill for $3, and decided with such a bargain I would figure out how to make it fit.

Getting it to work on this grill was pretty simple.  First I cut a slot in a piece of 3/16th thick steel so that the end of the rotisserie rod would be able to pivot in it.  The slots built into the grill housing were too thick, so I mounted this now-slotted piece of steel inside, using washers to provide the necessary clearance (photo 2).

I used a piece of right angle steel (photo 3) to mount the motor.  I fastened the steel angle to the motor's face using two of the four screws on the housing, and onto the side shelf of the grill.

The rotisserie rod was a bit too thick to rotate in the slot built into the grill, so I ground off the four corners until it had sufficient clearance to rotate (photo 3).

That's really all there was to it!  As best I can tell I saved about $86 dollars (not counting the shipping).