Roll Up Shelf

by Alex Badillo in Living > Organizing

1283 Views, 8 Favorites, 0 Comments

Roll Up Shelf

IMG_7292.JPG

This is a shelving unit that works like storage unit door. This shelf will be able to roll up and down from the ceiling for less space and ease of access. For the purpose of this Instruct-able I will be attaching this shelf to a wooden structure instead of the ceiling.

Materials

IMG_7267.JPG

1. Metal Plate

2. L-shaped metal rails

3. 1.5" screws

4. .5" nails

5. clear plastic or ply wood (I used poster board)

6. Power Drill

7. Hammer

8. Tape measure

9. Saw

Make Rail System

IMG_7271.JPG
IMG_7272.JPG
IMG_7273.JPG
IMG_7275.JPG
IMG_7274.JPG

For this step you need to attach the rail system to your ceiling. (In this example the place where the rail is would be in the attic part of your house) To attach the rail cut the L-shaped metal rail to desired length and nail on to the support beams in your ceilings. After the rails are attached put it aside for later.

Make the Shelves

IMG_7268.JPG
IMG_7269.JPG
IMG_7270.JPG

To make the shelves you will need to use your wood to make the shelves. What type of wood doesn't matter because you will only be making the frame. To do this you first need a rectangular base and a rectangular top. Once you have these two things you then connect them with a smaller piece of wood to create the frame of the shelf. After this, you will need to cover the outsides with ply wood (I used poster board to save money) to cover the shelf. You will need as many shelves as you want.

Connect the Shelves Together

IMG_7280.JPG
IMG_7281.JPG

After each of the shelves are done you will need to connect them with some hinges. Any hinges are fine just make sure they are strong enough to support the shelf. Also be careful when drilling the screws to make sure you don't split the wood.

Combine the Parts

IMG_7282.JPG
IMG_7284.JPG
IMG_7287.JPG
IMG_7293.JPG
IMG_7290.JPG
IMG_7295.JPG
IMG_7291.JPG

Next you need to combine the shelves and the rails to finish. Place the shelves on top of the rail. You may need to add another peice of metal to the end to help guide the shelves down. Once you have places the shelves and they can slide add a rope to make it easier to pull back into place.

Enjoy

IMG_7288.JPG
IMG_7289.JPG
IMG_7294.JPG

Now you are done with the shelves and remember that when the shelves would be put away it would go into the attic, I made mine on this structure to better show how it works and show the steps to make it.

Demonstration of Roll Up Shelf

roll up shelf demonstration

Here is a video that shows how the shelf works.