Rocket 3000

This is my Tinkercad Rocket. It is made with many shapes. See the other slides for how to make it.

We first put a cone on the work plane. After you put the cone, take a sphere, and then make the dimensions 47 height, 28.87 width, and 28.12 length. Then you put a workplane on the sphere and then put the half sphere in the middle. Now go put the cone on top of the sphere and group all of the shapes.

This is the jet of the rocket. Use a parabolaid. And use a cone, and a sphere. Put the sphere and then the polaboriad, then the cone. Then group them, but this time don't choose multicolor, instead choose red for the jet. As you can see in the rocket picture, you need to of these, copy and move to the other side of the rocket.

We're almost there. We put the jets aside for a while. Now we take a box make its height 17.43, the width, and height is there. Now we rotate the box till it looks like the picture, we make copy and we rotate it the opposite side now. To see how it it should look at the picture.

We take the paper* and the jet and make it to one jet. *I named it paper because it looks like a paper. You do the same for the other jet and paper.

Now we take the jets and the main base and group them together. We're almost done.

Now take a cylinder and put its length 12.00 and its width 13.16. Make its height 9.29. Now take a cone and make the same length and width of the cylinder for the cone. Make the height 4.18. Now put the shapes like the picture above, and now group them and make the color red if it's not already done.

Now put the shape under the main part in the picture and.... You're done!