Robotics Simulation

Hello Everyone!!

Welcome to my Instructables In this Post Im gonna Teach you guys how to create a obstacle avoiding robot simulation using the software called TinkerCAD It's very easy to create this obstacle avoiding robot

I have used:

1. Ultra Sonic Sensor(1no.)

2. Breadboard(1no.)

3. Motor(2no.)

4. L293d(1no.)

5. Arduino(1no.)

Join the wires as shown in the picture to create the circuit

After you have joined your wires and completed you circuit

code the simulation as shown in the picture so that your virtual obstacle avoiding robot can change it's direction when a obstacle is less than 15cm forward