Robot Challenge: BABY-IRH-P1
Meet Ironheart’s Mini Robot BABY-IRH-P1 from. She helps out the heroes out with hostage breakouts,
does system hacks, navigation and communication. Inspired by BB-8 from Star Wars!
Supplies
Project Sheet printed on one piece Paper or Cardstock, Scissors, and Tape or Glue.
Cut It Out
Cut out all the robot pieces from the paper.
Make the Wheel
Fold, then glue (or tape) the wheel together. It should look like the 2nd picture.
Make the Body
Fold the body into a cube. It should look like the 2nd photo.
Make the Head
Roll the head part in a circle and glue the tab underneath the design.
Make the Arm Cannon
Roll the arm cannon into a cone, leaving out the side flap. Fold the blue and white circle over the opening and glue with a black tab. It should look like this.
All the Peices
All your pieces should be folded like this!
Let's Put It Together.
Glue the body on top of the wheels.
Add the Little Arm
Fold the small arm a little bit and glue it on top of the body.
Add the Arm Cannon
Next glue the tab on the arm Cannon to the other side of the body.
Final Step
Glue the head on the red part only and make sure the eyes are facing forward. Then you are done!
Wakanda Forever!!!