Robo Car With DPDT Switch

This Robo Car basically remote control car using DPDT switch

1) 4 DC motor
2) Chassis
3) 4 Wheel
4) Connecting wire
5) Battery and battery cap

The motors are fixed to the chassis body and the tiers are fitted to the motor shaft
The battery is connected to the center of both DPDT switch

Motor Rotates clockwise and anticlockwise . So this simple logic is used to make our car to move forward or backward.
So far forward movement od the car the two motor on the right side must rotate clockwise and the two motor the left side must rotate anticlockwise and vice versa for reverse movement .

Fix the switch on the box with the help of circuit connection solder the wire into the switch terminals