Riving Knife
![DSC_0088_Momentxszdcs.jpg](/proxy/?url=https://content.instructables.com/FRE/S2P9/J3YPQLLW/FRES2P9J3YPQLLW.jpg&filename=DSC_0088_Momentxszdcs.jpg)
![DIY riving knife](/proxy/?url=https://content.instructables.com/FCY/X3OC/J3YPQJZ2/FCYX3OCJ3YPQJZ2.jpg&filename=DIY riving knife)
The importance of a riving knife can not be underestimated! If you have ever worked with circular saws then you know what I am talking about. Without it one of the most terrifying thing called kickback can easily occur.
My Makita MLT 100 contractor table saw came with a riving knife but this one had had one big flaw that really annoyed me. To fix this issue I made a completely new one and I would like to share how I did it with you!
I also made a short video of the build. Check it out!
This project is nothing really special or complicated but I hope that someone will find it useful.
Let´s get started!
Tools Ans Materials
![DSC_0035.JPG](/proxy/?url=https://content.instructables.com/FRM/UPB4/J3YPZ0Q9/FRMUPB4J3YPZ0Q9.jpg&filename=DSC_0035.JPG)
You will need:
- Sheet metal with thickness bit thinner than your saw blade.
- Optional: spray paint
- Old riving knife or a template
- metal file
- drill bit
- calipers
- oil for lubrication
- steel punch and a hammer
- jigsaw with metal cutting blade
- marker
- clamp for holding your workpiece
But Why?
![DSC_0048.JPG](/proxy/?url=https://content.instructables.com/F5O/AXE3/J3YPZ4CS/F5OAXE3J3YPZ4CS.jpg&filename=DSC_0048.JPG)
![DSC_0049.JPG](/proxy/?url=https://content.instructables.com/F4H/3T5F/J3YPQLDE/F4H3T5FJ3YPQLDE.jpg&filename=DSC_0049.JPG)
As I said my original riving knife had one big flaw. It was caused by it being too tall. It was designed so that it could hold blade guard/dust extractor, but I newer used it. Yeah, I know that you are supposed to use all the safety features that come with the table saw, but I personally find it much safer when I actually see the blade at all times.
The height of the riving knifed was a big pain in the buttocks. I could only make through cuts as the knife prohibit the workpiece from moving forward. It also blocked the movement of my table saw sled. Every time I wanted to use my slede or make a groove cut I had to remove the knife. It took quite a bit of time and I did not feel too comfortable sticking my hand inside the saw next to the blade to remove the thing.
At one point it was too much for me and I decided to spend a few hours to make a new riving knife. I did not really want to just cut the old one shorter as I might want to use it's features in the future (probably not, though).
Mark and Drill
![DSC_0055.JPG](/proxy/?url=https://content.instructables.com/FX6/DVGO/J3YPQLDL/FX6DVGOJ3YPQLDL.jpg&filename=DSC_0055.JPG)
![DSC_0063.JPG](/proxy/?url=https://content.instructables.com/F4W/YQ8F/J3YPQLEN/F4WYQ8FJ3YPQLEN.jpg&filename=DSC_0063.JPG)
![DSC_0066.JPG](/proxy/?url=https://content.instructables.com/FAN/R82G/J3YPZ0QB/FANR82GJ3YPZ0QB.jpg&filename=DSC_0066.JPG)
Use your already existing riving knife to trace out the shape of a
new knife. It is a good idea to clean the metal with acetone before you start marking as it will remove any oil and dust that is on the metal. There is also a good chance that you do not have an old knife to use as a template. In that case, I can think of two possibilities. Either you find the shape by trial and error with wooden/cardboard test pieces. Or you get the template from someone like a person from woodworking forum or maybe the manufacturer might even send you one. The height of the knife should be just a tiny bit shorter than the height of the saw blade.
Use a drill bit to make holes in the correct locations.
Mark and Cut
![DSC_0060.JPG](/proxy/?url=https://content.instructables.com/F08/GWVV/J3YPQLEH/F08GWVVJ3YPQLEH.jpg&filename=DSC_0060.JPG)
![DSC_0071.JPG](/proxy/?url=https://content.instructables.com/FT4/ND3I/J3YPQLFN/FT4ND3IJ3YPQLFN.jpg&filename=DSC_0071.JPG)
![DSC_0073.JPG](/proxy/?url=https://content.instructables.com/FT3/2O4I/J3YPQLGL/FT32O4IJ3YPQLGL.jpg&filename=DSC_0073.JPG)
![DSC_0077.JPG](/proxy/?url=https://content.instructables.com/FXU/9VL4/J3YPQLHT/FXU9VL4J3YPQLHT.jpg&filename=DSC_0077.JPG)
Use metal cutting blade and oil for lubrication to cut out the shape.
After that, it is a good idea to also use metal files to smoothen the
rough edges. After all, the saw blade is already dangerous enough - you don´t want to cut your fingers with the riving knife.
I also like to paint everything that is even remotely dangerous red so I would stay more alert around it. So I did also with my new riving knife. Be sure to use acetone to clean the blade thurally before applying the paint.
The End
![DSC_0088_Moment.jpg](/proxy/?url=https://content.instructables.com/F1G/PW7L/J3YPQLL3/F1GPW7LJ3YPQLL3.jpg&filename=DSC_0088_Moment.jpg)
![DSC_0085.JPG](/proxy/?url=https://content.instructables.com/FBW/CU19/J3YPQLJK/FBWCU19J3YPQLJK.jpg&filename=DSC_0085.JPG)
![DSC_0086.JPG](/proxy/?url=https://content.instructables.com/FN0/BJR8/J3YPZBNE/FN0BJR8J3YPZBNE.jpg&filename=DSC_0086.JPG)
![DSC_0091.JPG](/proxy/?url=https://content.instructables.com/FZP/ZLUJ/J3YPQLMK/FZPZLUJJ3YPQLMK.jpg&filename=DSC_0091.JPG)
Success!
Now I can make grooved cuts and the sled works also perfectly. And also it does not stick out from the table when the blade is fully retracted. I can now easily slide my fence over without bumping into it.
I hope you liked this simple project!
Cheers
Andu