Ripcord Sinnet Ll

how to make a rippcord sinnet ll

What you will need.
     
   paracord appx. 15 ft.
  
   scissors

   lighter

 

Find the middle of the cord,make a counterclockwise loop.

Bight the right running end through the loop.
Then bight the left running end through the right bight.
tighten the peice, leaving about 1/2 in. loop at the bottom.

Make a clockwise loop with the cord on the right.
Put the loop around the other loop, and tighten.
Then take the cord on the right and make a slip knot.
Insert the loop on the right into the loop on the left, and tighten the left loop firmly.

Make a couterclockwise loop with the cord on the left.
Put the loop around the other loop, and tighten.
Then take the cord on the left and make a slip knot.
Insert the loop on the left into the loop on the right, and tighten the left loop firmly

Repeat steps 4-5 until near the desired length.

Put the cord through the loop and tighten the loop.
Then tie an overhand knot. 

Put the bracelet on to see if it fits then snip and singe the ends.
The bracelet allows you to have 15 ft.of paracord instantly.
Just untie the overhand knot and pull the on the ends of the rope to unwind it.