#RioVisivel - Build Your Own Podia

Download instructions to print or view online.

Find Pallet and dismantle it. Keep all the timber planks

Hammer the sharp end of the nail and use pliers to remove the nails completely

Measure crate and cut supports and top pieces to fit, allowing for a 15mm overhang on all edges on top crate, and the three outer edges on the two bottom crates

Screw supports into place

Screw top pieces to the supports

Cable tie the crates together - how you do this may change depending on the type of crate you have chosen

Measure sides and cut pallet wood to fit. Screw in place

Measure front and cut pallet wood to fit. Screw in place

Add a kick board to the sides at the bottom