Riding Leaf Blower

by rjkorn in Workshop > Electric Vehicles

7907 Views, 58 Favorites, 0 Comments

Riding Leaf Blower

IMG00090.jpg

I got tired of walking around with a gas powered blower trying to get all the leaves into a pile. I found enough parts to make an electric blower for my electric golf cart. this save my back and eliminates the need for all that gas/oil mix in the shed. I've seen plenty of big gas powered blowers even some bigger than this but why not go green.

Fitting It All Together

IMG00084.jpg
IMG00085.jpg
IMG00086.jpg
IMG00087.jpg

I found this blower in a dumpster. It needed new bearings but the cage was in good shape. I had a 48V reel motor from an old reel to reel computer tape drive. These are amazingly powerful.I fitted the motor into the outlet area. I only needed half the port area for the reducer duct and I was going to cap off the rest anyway. some air leaks out around the motor and this keeps the motor cool

First Test

IMG00089.jpg
537121129d29c956bc000013.jpg

I used a 12V battery to test the idea and it worked pretty good that way. I never bothered to hook up to the main battery pack since it would probably blow the duct apart. its a 36V cart but the batteries are pretty fresh so they sit over 40V as seen on the cool digital dash I added to my EZGO.

Much quieter and I get to sit comfortably until its time to rake them into bags.