Retractable Solder Fume Extractor (From an LED Light)

This Is a fan that I use while soldering to get the solder fumes out of my face!

Why did I choose this fan? This Is Why

If you are wondering what I am connecting it to, It is my home-made peg-board. If you are interested this project this is the link

If you don't understand why there is a weird flashlight on this pegboard you can see this project here

1. A Retractable LED Reading Light

2. Wires (There will be an explanation why at Step 3)

3. Zip Ties

4. The Fan

Wire Cutters

Pliers

I used some extra 220 VOLT wall wires I had because the bending lamp structure wasn't strong enough to hold the fan.

I did this gently using pliers

I cut the wires to the exact length of the lamp and connected them (with zip-ties) to the bendable structure of the lamp to make it stronger.

I did this by tying the zip-ties and the lamp together as seen in the picture

Now this is an ultra powerful fume Extractor!

Now this is connected to my table because I replaced the small pegboard with a huge Magnetic Pegboard!

I've also made an Instructable about my "Magnetic Pegboard" which you can see here!

Thank You For Watching! Don't forget to visit my Instructables page for more projects!