Replacement Buttons for an Old Garage Remote

Materials: 2 Unused ear plugs, 2 washers, glue, and some clamps

Step 1: Put the ear plugs down into the holes of the garage remote on top of the little push buttons. Leave the top part of the ear plugs sticking out of the holes.

Step 2: Put glue on the washers and slide them over the ear plugs, keeping the tops of the ear plugs sticking out of the washers. Put clamps on the washers until glue dries.

All finished. The ear plugs act as a spongy button. Click down the garage door should open. Click again and the garage door should shut!