Repeating Crossbow Version 2

by amech3 in Outside > Siege Engines

4197 Views, 93 Favorites, 0 Comments

Repeating Crossbow Version 2

20150326_204007.jpg
20150326_203948.jpg
20150326_204035.jpg
20150326_204158.jpg
20150326_204227.jpg
20150326_204106.jpg
Repeating crossbow verson 2

Gluing Together Stock

temp_565883861.jpg
temp_196549495.jpg
temp_-761272658.jpg
temp_1759949206.jpg
temp_1254393154.jpg
temp_-1246669038.jpg
temp_914125162.jpg
temp_1675801215.jpg
temp_-42057188.jpg
temp_1668140423.jpg
temp_-1036285937.jpg
Screenshot_2015-03-26-23-57-39.png
temp_1086266335.jpg
temp_1808439704.jpg
temp_-227000498.jpg
Screenshot_2015-03-26-23-56-18.png
Screenshot_2015-03-26-23-56-33.png
I used two pieces of 3/4" think by 3 1/2" wide maple wood boards to make the stock.

The Individual Machine Components Are Then Laid Out for Installation.

Screenshot_2015-03-26-23-45-01.png
Screenshot_2015-03-26-23-45-22.png
vhc 011.jpg
vhc 010.jpg
vhc 009.jpg
vhc 008.jpg
vhc 006.jpg
vhc 004.jpg
vhc 003.jpg

All of the Pieces Are Then Assembled on to the Crossbow.

20150325_200905.jpg
20150325_201024.jpg
20150325_200954.jpg
20150324_225233.jpg
20150324_225220.jpg
20150324_191008.jpg

Turret

temp_1598024194.jpg
temp_-1638334199.jpg
temp_-2115865519.jpg
temp_2116099119.jpg
temp_-980123664.jpg
temp_1791302690.jpg
temp_1725891863.jpg