Repairing a Toilet
my toilet was leaking from 2 spots and lacking bad. The 2 pics are of what broke the water line and the fill valve. the rubber seal on the fill valve was cracked and the lone had a pin hole in it
Turn Off Water and Flush Toilet (VERY IMPORTANT!!!)
You'll get wet otherwise
Drain the Tank and Hose
unscrew fill valve and drain into a bucket
Start Assembly of New Fill Valve
pretty simple just make sure the rubber seal is tight and don't screw it too tight
Attach Water Lines
In picture 5 is the adapter that was needed to fit the line on and in picture 1 I hooked up the drainage tube.
Attach the Floater
after you get everything else together turn the water on and make sure it will stop at the fill line
Make Any Necessary Adjustments
Do a few test flushes and now you're done