Repairing Canopy Frame Ribs

My canopy got messed up in a wind storm and it broke a few frame ribs.
Remove and Matched Up Broken Frame Ribs

I bought 3 eight foot 5/8 x 11/2 trim boards and measured each rib.
Marking the Holes


I used the broken ribs to match,mark and drill out the wholes, I also rounded the edge of the board that goes into the top of frame. I used a belt sander but you can also use a hand sander.
Painting

I used grey primer paint which matched well
Attach the Ribs


I re-attached the ribs using original hardware.