Renew Motorcycle Winter Gloves

Riding a bike in the winter require good gloves.
So these gloves worked grate for a few years and last year watte resistance fail totaly.
I bought new ones but it was hard to give up the old ones.
So i decided to renew them.

Old winter gloves
Fabric (very sharp) Scissors
Thick nitrile (?) Gloves
Strong sawing maching or a friend with one :')

We need to open the bottom end of the glove in order to remove the inside.

Pull the lining inside glove out stringly and slowly it might be glued to the outside.

Now you can see the old and worn out water resist lining.
Take it off and give it a good clean, and also from the inside of the "shell".

Put the lining on your hand
Pull the nitrile glove over the lining
Pull the shell over the nitrile glove

Cut and saw the bottom end
Have fun ;')