Recycled IPod Sleeve
Last year I got an iPod. But I still was looking for something I could carry my iPod and headphones without having to buy anything. Well I've finally found it. Here is a case made from old worn out pants. That took a grand total of about an hour to make. Well here goes...
�What You'll Need
iPod
Sewing scissors
Old jeans
Sewing machine (not pictured)
Sewing scissors
Old jeans
Sewing machine (not pictured)
Cut Out Back Pocket
A fairly simple step it doesn't have to be perfect so don't sweat it if you accidentally cut of the trim.
Cut Off the Trim
Cut off the outside trim. But not the part I mentioned on the picture below.
Cut Off the Ends
Cut off from about one half inch from the iPod. Now cut off the trim.
Fold and Sew
First the fabric in half. Then sew to the correct dimensions of your iPod.
Sew Across the End
Position the seam in the middle. Then sew across the correct line depending on your iPod length.
Cut Off the Extra
Cut off the excess fabric.
Turn It Out
Turn it inside out.
Congratulations!
Now you can carry your iPod and headphones in style. Thanks for reading! =D