Recycled, Steampunk Watch

 This DOES NOT WORK. If you have a broken watch and 30-45 minutes you can steampunk it, and give it as a gift. This is meant for a shelf, because it does not tell time. Also, I made this with rck_mtn_climber.

 wire 
pliers / wire cutters
broken watch
hot glue gun
silver and gold paint

 Just pull 'em off

 use pliers to pull the dial off ( it may take some strength)

 im not exactly sure how we did this so sorry

 pry this off. 

note: if your watch does not have this then you can paint on the gold ring at the end.

 If you pry off the glass cover, the clock and some other parts will fall out.

 if you were paying attention earlier and read the notes then this is the random screw. Just screw it in, but leave some hanging out.

 The clock's hands should have been removed. On the back of the watch, there will be this battery section. Use the pliers and more strength to remove the odd shape in the center. Cut the dial where the threads end. Then place the battery section and the dial over the center of the clock face. Add hot glue. Let sit.

 Screw two screws into the top where the wrist straps were.

 Cut off some wire and wrap it around the two screws we put on in step 9. Coil some more wire and hot glue it around the watch. Look at the pictures for more detailed instructions.

 Paint the main body silver and the back and outer rings gold.

 Place the clock, the back, and the outer ring back on the main body.

 FIx up the paint, and whatever else if you need to. If you don't need to then you're done.