Recycled Spark-plug Biplane

Hi All,

You may have seen on internet, that many have recycled old spark-plugs into various decorative items like X-Wing, biplane, etc. All of these are made by welding metallic sheets on the spark-plug. Now I am not qualified ot trained to use a welding machine but I wanted to make one....

So, In this instructable, I will share how to make a decorative biplane using an old spark-plug, some popsicle sticks and spare buttons that we never use.

• Spark-plug
• Popsicle sticks
• wooden skewers
• Spare Buttons (that we never use)
• Super glue
• Cutter

• Cut a 30 mm and 15 mm length of popsicle sticks
• Stick the smaller piece as shown to make the tail wings
• Cut the edges to give wing like look

• Stick two sets of two popsicle sticks as shown
• Then super glue them on the spark plug to make a biplane
• Be cautious when using super glue

• Using wooden skewers, add two supports and one at an angle on both sides
• Add rotors as shown

• Attach two skewers, at the bottom of the plane
• Let it dry, and then add buttons as Tyres
• We need 2 for front and 1 for back

Done!! we have a recycled spark-plug biplane decor. I hope you like this super quick build..

Please share your comments and suggestions