Recycled Key Rack

This is a neat way to use some extra keys that you may have hiding in a drawer. Lets you organize your keys by using keys!

A quick project that can be done in under an hour.

A person doesn't need much to make this. A pallet board and some screws, a drill with screwdriver bit and a drill bit, 2 pairs pliers, a piece of sandpaper, and a saw. That's it!!

You can make this as long or short as you'd like.

Sand the board to get rid of splinters. Doesn't need to be real smooth though for this project.

Drill 2 holes to mount the board to the wall.

Find the keys you want to use in your junk drawer. Luckily I saved back a few.

If you don't have any in your junk drawer, there is usually a set like this attached to the pants of a friendly janitor. Just distract him like I did and make a run for it!

Seems that brass keys bend the best. May want to get a few extras, just in case they break as you bend them.

Bend the keys with both sets of pliers like as in the picture.

Screw on the bent keys and you are ready to install.