How to Recycle Discarded Coconut Shells

by DHASWIN KUMAR S in Craft > Reuse

193 Views, 4 Favorites, 0 Comments

How to Recycle Discarded Coconut Shells

IMG_20240531_103346_108@174540662.jpg
IMG_20240531_103314_762@1280311377.jpg

In my village, nestled among an abundance of coconut trees, we have a tradition of making use of every part of this versatile fruit. From cooking to crafting, coconuts play a vital role in our daily lives. Inspired by this heritage and the desire to reduce waste, I have created a unique cup from discarded coconut shells. This eco-friendly and sustainable creation not only showcases our resourcefulness but also highlights the beauty of reusing natural materials. Join me in celebrating this blend of tradition and innovation as we find new ways to honor and utilize the gifts of our land.

Supplies

coconut-shell.jpg
sand paper.jpeg
rotary tool.jpg
glue gun.jpg
  • COCONUT SHELL
  • SAND PAPER
  • ROTARY TOOL
  • HOT GLUE GUN

Preparation of the Shell

COCONUT FULL.jpg
divide half.jpg
  • Take a slightly elongated coconut.
  • At the top of the coconut, there will be three germination holes. Pierce one of the holes and drain out all the water from the coconut.
  • Cut the coconut as shown above using the Rotary tool such that the bottom portion has more length.
  • Now remove the kernel using a knife.
  • Now our coconut shell is ready.


Further Dividing the Shell

COCO LINE.jpg
move.jpg
IMG_20240529_104827_719@-1588634630.jpg
  • Now divide the shell further as shown.
  • Here the top part serves as the base, the middle part serves as the handle and the bottom part serves as the cup.

Polishing the Sides

  • A coconut surface is usually rough and husky. So, use the sand paper to polish the surface.
  • This step may take up to 3 hours if you are doing it with hand.

The Top Part

top part.jpg
  • Cut the top part further as shown such that a small hole is made.
  • Now, the bottom part can be easily fitted on this top part.

Making the Handle

HANDLE CUT.jpg
the middle part.jpg
the handle.jpg
  • This middle part serves as the handle.
  • Cut the middle part as shown.
  • Now, design the middle part as per your wish.

Gluing Every Part Made So Far

arrangement.jpg
  • Now glue them in the orientation as shown using glue gun.
  • Dry them for 10-15 minutes.

Finally.....

finally.jpg

Finally our cup is ready. Now pour the drink and enjoy the natural bliss.