Really Simple Touch Switch

by Chris Project in Circuits > LEDs

1493 Views, 10 Favorites, 0 Comments

Really Simple Touch Switch

Screenshot_2016-10-09-09-25-43.png

Hello,

today i'm gonna show you how to make a really simple touch switch

Watch the Video

The video is in my youtube channel Christopher Tjia (i chage my channel name). Link:

https://www.youtube.com/watch?v=-Lnef0JxkpM

The Schematic

20161009_093721.jpg

Buy All of the Components

Screenshot_2016-10-09-09-19-15.png

The components for this project are:

2pc BC547 transistors

1pc 10k ohm resistor

1pc 1k ohm resistor

1pc 740 ohm resistor

1pc 9V battery clip

1pc 9V battery

Connect the Two Transistors

Screenshot_2016-10-09-09-19-55.png

first, connect the base pin of the first BC547 to the emitter pin of the second BC547

Connect the Led

Screenshot_2016-10-09-09-23-48.png

Then, connect thenegative pin of the led to the collector pin of the first BC547 transistor

Connect the Resistors

Screenshot_2016-10-09-09-23-21.png

connect the 1k ohm resistor to the second BC547 transistor and the 470 ohm to the positive pin of the led.

Connect the Resistor Again

Screenshot_2016-10-09-09-25-17.png

solder the 1k ohm resistor to the 470 ohm resistor and connect the 10k ohm resistor to the basee pin ot the second BC547 transistors.

The Final Connection

Screenshot_2016-10-09-09-25-06.png

finnaly connect the positive wire of the 9V battery to the1k ohm resistor and the 470 ohm resistor. then the negative wire of the 9V battery clip is connected to theemitter pin of the first BC547.

Testing

Screenshot_2016-10-09-09-25-43.png

if you connect every thing correctly then if you tuoch te 10k ohm resistor and the positive wire of the 9V battery clip, the led will turn on.