STARWARS - SNOWSPEEDER - SLED

So after my last Delorean - project https://www.instructables.com/id/Custom-Delorean-P... i wanted to go more epic... so the idea was to build a "real" snow speeder sled.

Materials used:

-Plywood 8 mm

- 2x4 planks

- pvc pipe scrap

- screws

- woodcolour

I did not make big plans and worked pretty freehanded and minded ;)

There is no mutch to explain... just look at the fotos :) they are almost step by step

i used scrap pipes from my elevtric installation, pipes from my ventilationsystem etc

first i tried with spray cans to see how i want to do the coloring

So i tryed to give it a used look so i started with layers of black and grey an light grey until i got my result

This step was pretty easy, i took of the old seat from the sled and used a plank to fix on the frame, this is the new seat and so i could use the same bearings

So finally finished and ready for test ride,... but there is still no snow over here,...

but wait ah today it fell some snow and i can give it a test ride... maybe ill post a video ass soon ass im back from hoth :)