Rc Car Trailer
by CollinTheBoss in Workshop > Electric Vehicles
3433 Views, 10 Favorites, 0 Comments
Rc Car Trailer
![13, 11:56 AM.jpg](/proxy/?url=https://content.instructables.com/F8Z/1ICS/HK1DF3IS/F8Z1ICSHK1DF3IS.jpg&filename=13, 11:56 AM.jpg)
This is a quick look at my 1/24 scale Rc trailer
Body
![13, 11:56 AM.jpg](/proxy/?url=https://content.instructables.com/FW6/PBQM/HK1DF3IQ/FW6PBQMHK1DF3IQ.jpg&filename=13, 11:56 AM.jpg)
The body is just an extra pece of ply wood i had laying around
Wheels
![13, 11:56 AM.jpg](/proxy/?url=https://content.instructables.com/FMG/ZUJP/HK1DF3IN/FMGZUJPHK1DF3IN.jpg&filename=13, 11:56 AM.jpg)
The wheels i used were from an old toy. I just hot glued them on.
Hitch
![13, 11:56 AM.jpg](/proxy/?url=https://content.instructables.com/FX5/MSFE/HK1DF3IU/FX5MSFEHK1DF3IU.jpg&filename=13, 11:56 AM.jpg)
The trailer hitch is just some kind of screw that i hot glued in.
Ramp
![13, 11:56 AM.jpg](/proxy/?url=https://content.instructables.com/FU5/4R08/HK1DF3IP/FU54R08HK1DF3IP.jpg&filename=13, 11:56 AM.jpg)
The ramp on the back is just bent scrap metal with duct tape on it.
Decoration
![13, 11:56 AM.jpg](/proxy/?url=https://content.instructables.com/FFT/UJNE/HK1DF3J5/FFTUJNEHK1DF3J5.jpg&filename=13, 11:56 AM.jpg)
I duct taped the top of the trailer to decorate it.
Done!
![13, 11:56 AM.jpg](/proxy/?url=https://content.instructables.com/F3K/W4QL/HK1DF3J8/F3KW4QLHK1DF3J8.jpg&filename=13, 11:56 AM.jpg)
This is the finished product