RaspberryPi 3/4 Extension Board for Add Extra Features to Raspberry Pi

we know that raspberry pi 3/4 is not come with built in ADC(analog to digital converter) and RTC(real time clock)

so i design a PCB that contain 16 channel 12bit ADC, RTC, SIM7600 4G module, push buttons, relays, USB power out , 5V power out, 12V power out

BOM is attached below

Supplies

BOM is attached below

Schematics

Schematics is design by section vice, in Schematics there is section for adc, rtc, power supply, relay, push buttons, sim7600 4g module, connector, raspberry pi

Schematics 1 for Push Buttons, RTC, and Raspberry Pi Connection

Schematics: 2 Is for Relays and Logic Level Converter Connection

Schematics: 3 for ADS7953 TSSOP-RU 38(ADC) and Its Required Component

Schematics: 5 for ADC Channel Connector for Connecting Sensors

Schematics: for 4G Module(sim7600) and Its Required Component Connection

Schematics: for Power Supply Connection

Board Design in 4 Layer All Layer Show Here

First Layer

Second Layer

Third Layer

Bottom Layer

After Design Board Is Look Like This

After Successful Inspection Manufactured Pcb and After Manufacturing Pcb Is Look Like

Final Look

add 7-inch touchscreen LCD for view the sensor data, you will use this PCB as you want because it contain every thing what need for making any project.

know we able to connect any arduino sensor with raspberry pi and its has also connectivity for 4G network show we make IOT project with it easily.

more than 16 sensor connected with this PCB

5 relay is available for controlling for device or module

4 input buttons is available for give input to raspberry pi

RTC is available for correct time

4G connectivity for IOT project where Ethernet cable or WiFi is not available

and other advantages available of raspberry pi so used it.

here i put all thing in plastic container box.