Rarely Used Bench Grinder Support

by branke in Workshop > Organizing

4266 Views, 60 Favorites, 0 Comments

Rarely Used Bench Grinder Support

IMG_2345.JPG

As you can see, not much of a bench, not much of a bench-space.

Thought someone in my situation will like this.

I got a decent vice, and a Bench Grinder I need to use rarely.

Making the Bench Grinder portable was my only choice, so here it is.

IMG_2346.JPG
IMG_2351.JPG

I drilled 2 holes in the piece of an angle iron I had.

I am not giving measurements due to the different brands, sizes

of the Bench Grinders available.


IMG_2350.JPG
IMG_2349.JPG
IMG_2348.JPG

Once bolted on the Grinder ( I used safety nuts to prevent becoming loose), İt is ready to put into the vice.

Now I have a very secure, safe to operate bench Grinder.

IMG_2347.JPG

I do not have any vibration problem, just in case I will, I am going to use these

Rubber Mounting Grommets between the Grinder and Angle iron.

I got them from wreckers, off car exhaust.


Very simple, very cheap way not to clutter the bench.

Hope someone will benefit.

Regards,