Rainbow Loom ZigZag Bracelet
by Alanna and Jackie Crafts in Craft > Jewelry
1285 Views, 1 Favorites, 0 Comments
Rainbow Loom ZigZag Bracelet
This bracelet is a intermediate design, if you are a beginner I would recommend trying easier designs before doing this one, I hope you enjoy!
Supplies
You will need:
Bands
Loom
Hook
C or S clip
Set Your Rainbow Loom to Parallel Lines
Put Your Bands in a Square Shape
Once you are done making the square, repeat the same step
Once Your Done, It Should Look Like This
Flip your loom around so the arrows are facing you
Make a Capping Band
Get a rubber band and make a figure 8 and wrap it around itself 2 times
What the Pink Squares Need to Look Like
Use the pictures for reference
What the Blue Squares Need to Look Like
Use the photos for reference
Use This Guide for Pulling the Bands
Your hook needs to go under the bands and pull the band where it needs to go using the guide
Keep Repeating That
This Is What It Should Look Like
Get a Band, and Put It Inside the Peg Then Pull It Up on the Hook
To do this, put the hook inside all of the bands in the middle of the last row of pegs on the arrow and get a band and pull the hook up. Once you see the band coming up from the bands, put the band on the bottom on the hook
Pull of Your Bracelet!
My favorite part! Hold on to the loom, and pull the hook up.
Add a Extension!
Put the band on the top on your fingers like you were making a single chain
Closing the Bracelet Off
Get your clip and put it on the band that is on your fingers
You Are Now Done Your Bracelet!
I really hope you enjoyed this bracelet! Like and follow for more! - Alanna