Rack for Microwave and Oven
This is a very simple project to do, but thanks to him I have an oven at home.The only place I had on the oven was already occupied by a microwave oven. The top of the oven heat up so much that you can not put your hand and the bottom is a little warm. So the oven must stand on the top the rack.
You can see the whole project here: Rack for microwave and oven
Components and Tools
- 8 x angle brackets
- 32 x screws
- 2 x fibreboards covered
- 4 x wooden beams
- 2 mm drill bit
- screwdriver bit
- cordless driller
Measuring and Cutting
At the beginning I measured how much need to cut fibreboard and wooden beams.
Drilling and Screwing
For easier screwing, at the beginning I drill the holes with a small drill bit.
I use four screws on one angle bracket.
Rack Finished
The rack is finished, it's time to put him in the right place.