R.P.G
here it is! the first knex rpg on this site!sorry for taking so long, just got back from skate camp and immediately started to work on it. Has extremely long range and is fairly easy to load.doesn't use to many pieces hope you enjoy!
Mechanism
1.buid
2.add
3.add
4.build
5.build
6.build
7.build
8.attach pieces together
9.build firing pin(sharpened)
2.add
3.add
4.build
5.build
6.build
7.build
8.attach pieces together
9.build firing pin(sharpened)
Handle/trigger
1.build
2.build
3.attatch
4.build
5.attatch trigger to 1st step
6.add handle
2.build
3.attatch
4.build
5.attatch trigger to 1st step
6.add handle
Barrel
1.build
2.build
3.build
4.add
5.slide piece 2 through yellow rods on both sides
6.attatch piece 1
7.add grey pieces to both sides of yellow rods
8.should look like this
2.build
3.build
4.add
5.slide piece 2 through yellow rods on both sides
6.attatch piece 1
7.add grey pieces to both sides of yellow rods
8.should look like this
Connect Pieces
1.connect barrel to trigger and mechanism should be fairly easy.
2.add firing pin
2.add firing pin
Bullets, Rubberband, Placement, and Loading
1.add 2 rubberbands to firing pin
2.add rubberband to trigger
3.add rubberband to top of firing pin
4.bullet 1
5.bullet 2(this one is better it is sturdier)
6.you need a large rubberband for the barrel(do not know exact size)
7.put rubberband like this on front of barrel(should look like this on both sides)
8.stretch rubberband back ,lock in the bullet and hook rubberband onto hook of the bullet(look at my video if you do not understand)
2.add rubberband to trigger
3.add rubberband to top of firing pin
4.bullet 1
5.bullet 2(this one is better it is sturdier)
6.you need a large rubberband for the barrel(do not know exact size)
7.put rubberband like this on front of barrel(should look like this on both sides)
8.stretch rubberband back ,lock in the bullet and hook rubberband onto hook of the bullet(look at my video if you do not understand)