REPAIR LOOSE DRYWALL ANCHORS

by Kink Jarfold in Living > Decorating

162443 Views, 15 Favorites, 0 Comments

REPAIR LOOSE DRYWALL ANCHORS

WALL ANCHORS 2.png

Here is an easy fix for loose drywall anchors.

TYPES OF ANCHORS

WALL ANCHORS 1.jpg
WALL ANCHORS.jpg

This quick fix will work on the straight in type of wall anchors in the first picture. It will not work on the ones that expand behind the walls.

INSTALLING a WALL ANCHOR

IMG_7669.JPG
IMG_7670.JPG
IMG_7671.JPG
IMG_7672.JPG

Of the straight in types of wall anchors, this one is perhaps the most secure. With any of this type, installation is usually to poke a small hole and either tap or screw in the anchor.

INSTALL THE REASON FOR THE ANCHOR

IMG_7673.JPG
IMG_7674.JPG

I'm showing a coat hook. This method can be used for any wall hanging for which an expandable anchor was NOT used: bathroom towel bars, toilet paper holders, pictures, or any type of hook like the one shown.

JARFOLD, WE HAVE a PROBLEM

IMG_7676.JPG

Oh, oh, the anchor has pulled out of the wall. What do we do?

USE EXPANDABLE GLUE

IMG_7677.JPG
IMG_7678.JPG

Gorilla Glue and similar products expand when drying and is used a lot in furniture making for that reason: to get tighter joints. If you glob this stuff on the anchor and put the anchor back in the same hole (you might have to use some painter's tape to hold it in place) and let it dry....

VOILA!

IMG_7675.JPG

Let it dry overnight. Now you can hang something heavy on it.

HOPE YOU FOUND THAT INFORMATIVE

LITTLE SHOP.png
A HAPPY JARFOLD KIND OF DAY.png
BUILD US SOMETHING, KINK, OR ELSE.png

Of course, if the hole is way beyond the ability of the glue to expand, or if the sheetrock is so damage a patch has to be made, or a host of other reasons this cannot be done, then you have to rethink the solution. My motto: I never have a PROBLEM, I only have a CHALLENGE!

Hope you enjoyed. Comments are always welcomed. I'll enter this in the STICK IT CONTEST and see what happens.

KJ