RECHARGEABLE LED CAR BONNET ASSISTANT!

Some times one's car breaks down at night in the middle of no where and there may be no light to fix it! For that I have made an easy solution to fix that problem!

An easy USB rechargeable magnetic led assistant!

You will need:

• Some skills!
• 1w/2w/3w leds (one or more. Actually one 2/3w led will do. if using 1w use two of them)
• A small 3.6v ni-dc 100mah and higher button cell battery (use more mah count battery if using more leds/more watt led)
• Male USB port
• small Perf board
• Magnet
• Soldering Iron and soldering wire

Use the schismatics above, it will help you...

Remember: Connect the USB +5v to the positive side of the battery and GND(ground or negative) to the negative side of the battery. NOT vice-versa or you will screw up the battery or the usb port!

Keep this charged in your car and use it when in need or a breakdown! :D

OH yea another thing you could us it for is: To stick it on to a fridge door with all other souvenirs!