RC Airplane Airbus A320 in Tinkercad

If you are also a RC plane hobbyist just like me then you have reached the right destination because today we will be building an RC airbus A320 airplane in tinkercad which looks amazing.

The best part is, you can use it as a toy or can make a flying RC plane.

Now its your choice if you want to make this plane you can make by yourself just for fun and learning perspective or you can print the files and enjoy flying.

1. Tinkercad
2. 3D printer
3. most importantly passion of making and flying

1. Take a sphere and make its length 40 cm.
2. Now duplicate it with the command control + D.
3. Take hollow square and make its vertical length 10 do the same with the sphere.
4. Make breadth of square 28 cm.
5. Now align the shapes and join them and cut.
6. The shapes we got in final sphere, cut sphere and a bend sphere.

1. Align the shapes and we will get a UFO shape.
2. Adjust the length of UFO.

1. Take a cylinder and add it to the UFO shape as shown in above image.
2. Take a sphere and make its length 80 cm.
3. After done it should look like image 7.
4. Now take a cylinder and add it at the back section.

1. Now with align command align the fuselage into one complete section.
2. Select the color, at later it will be difficult to select it for fuselage.

1. Take wedge and bend it 90 degrees and make its length 1 cm from top to compress it.
2. Make duplicate and adjust so it looks like a rudder.
3. Adjust the lengths of wing and place them.

1. Do the same as done with the wings.
2. For the rudder just duplicate the stabilizer and move it 90 degrees.
3. Place them in their positions.
4. Make them a single section.

1. Take a sphere and hollow square for cockpit window.
2. Place the sphere between 2 hollow squares for the circular window.

1. Take a cylinder and a hollow square.
2. Place the cylinder between two hollow squares.
3. Cut and make windows.
4. Place the windows as shown in images.

1. Take two sphere and a hollow square.
2. Cut the sphere into half and adjust the lengths.
3. Join the sphere.
4. Make a hole in the sphere as shown in the images.
5. Take wedge and make stabilizers as previously done and attach it to the sphere part.

1. Make more engines and attach it to the wings section.

Congratulations !!!! We have made it.

Happy Flying :D