Quick No Sew Flask Holder

With a small piece of leather and some hot glue I was able to create a great, easy to make flask holder to add as an accessory to a great Halloween costume.

Here is what I used to make my no sew flask holder

A scrap of leather

Hot glue gun

A flask

I started by cutting the leather so the width of the leather would fit the width of the flask.

I then measured how much of the leather would be required for the flap at the bottom

I then sketched out and measured an opening for the top of the flask, and cut it out.

My next step was to glue the side of the flask holder closed.

I did this by folding the top part of the flask holder down and putting a bead of glue along the side.

I then flipped the other side of the leather up, gluing the side closed.

The next step was to trim the top flap so it would fold over flush with the flask.

Then I added a closure to the holder by gluing a strip of fabric to the flap then cutting a handle into the body of the flask

My final simple step was to add a handle to the flask.

This consisted of cutting a thin strip of leather and gluing it to the back of the flask holder

With that added touch I was done!

Disclaimer: This is no way part of being a daily worn thing. This is just a simple addition to a costume to make a great accent.

Enjoy!