Quick, Cheap, and Easy Tripod

this is a very simple tripod for a camera that you can keep in your pocket. just screw it onto a water bottle, which shouldn't be a problem since there are coke machines everywhere.

materials:
1 1/4" hex bolt, 3/4" long
2 1/4" hex nut
1 bottle cap

tools:
drill
1/4" drill bit

time:
< 5 minutes

cost:
< $.50

use a 1/4" or slightly smaller drill bit and drill into the center of the bottle cap.

screw one of the nuts onto the bolt all the way down.

screw the bolt onto the bottle cap.

screw on the other nut.

screw the bottle cap onto a full water bottle. depending on the siz of the camera and location of the tripod mount on the bottom of the camera, it should hold.