QUADRONE COPTER

WE MADE A QUADRONE COPTER THAT NEED 9 COMPONENT TO FINISHED IT

FIRSTLY, WE START WITH THE BASE OF THE DRONE BODY.

THEN, CARRY ON WITH THE SECOND BASE ON TOP OF THE DRONE BODY

AFTER THAT WE WILL TAKE A STEP TO THE SPINNER FOR THE BLADE TO SPIN

THE WE ADD THE SPIDER TOP TO HOLD BOTH BASE

WE CREATE AN ARM TO MAKE SURE THERE IS SOMETHING TO HOLD THE BLADE

AFTER THAT SOME PILLAR SHOULD HOLD EVERY COMPONENT AT THE SPIDER ARM OF THE DRONE

THIS IS SPACER THAT MAKE SURE THE FAN AND THE MOTOR SHOULD HOLD TOGETHER

LASTLY, WE ADD THE FAN BLADE TO MAKE SURE OUR DRON CAN FLY WITH THOSE SPIDER ARM

AND FOR THE MOTOR TO MAKE SURE ALL THE FUNCTION OF THE FAN BLADE WORK TOGETHER