Pulley System and DC Motor Generator Prototype

I have made a project with a simple pulley system and it also demonstrates a free energy generator. We know what is a Pulley System and the fact that we can get a little amount of electricity using a simple motor by spinning it's axle by any method. Here we are giving the spin to the motor by another motor which can be replaced by a human activity another source of electricity is not needed.

2 DC Motors

2 Pulleys (1 short and 1 big)

A 9v Battery and it's connector

A 1mm LED

Rubber Band

First, glue the 2 motors on a box and take the 2 Pullies Insert them in the motor shafts.

Now solder the pins of the LED to the terminals of the motor with the smaller pulley.

Now put a Rubber Band connecting the Pullies as shown in the image above. Connect the battery connector to the motor with the big pulley.

Now connect the battery and see the model working!

If you make it yourself please share the photos in the I made it section.

If you liked this Project, don't forget to Favorite it and Follow me for more such instructables..!

Also write in the comments what you think of this project.

Please vote it for the "Simple Machines Challenge"...