Pulley Rope Table

In This Project, we are going to build a table which is going to stand on ropes.

1. Two Square shaped Cardboard sheet (Of the Same Size)

2. Thread

3. Old-Used Pen refills.

Tools we need:-

1. A pair of scissors

2. Pliers

3. A compass

4. Super Glue

1. Make 4 Holes in both the square sheets as shown in Fig no. 1.

2. Bend Both refills with the help of pliers at 90 degrees. (As shown in fig no. 2)

3. Join the refills and sheets with the help of superglue as shown in Fig no. 3.

Step 1:- Join Both the refills with Thread. (As shown in Fig no. 5)

Step 2:- Join the holes of both cardboard sheets as shown in Fig no. 4.

Now the Table is ready.