Ghosbuster Protopack Whith Ligth

Costume for kids or adult is my first instructable used recycle material to created the proton pack cheap but need patience and hand work.

-Precaution:

Can suffer injuries if not taken care of so I do not take responsibility for any injury if any tool does not know how to use it is better to seek help.

Tools:

• Safety glass
• Scissors
• Cutter knife
• Hot glue
• Hot glue sticks
• Soldering
• IronSolder and flux
• Wired cutter
• Hair dryer
• Dust mask

Technics:

Soldering

Hair dryer Bending-PVC

Stove Bend-PVC-Pipe/

Glue class

Material proton pack :

1 - Cardboard for the base the dimension depend on your food containers.

2 -Food containers 1 rectangle with 3 separations and the other circularly.

3- Transparent disposable cups need 4, only the base(If possible already used)

4- Portable Bluetooth speaker

Proton gun material:

1 - Cheap Lightsaber toys(dollar tree)

2 - Nunchaku toys(dollar tree)

3 - Push button 2 parts

Cyclotron and power cell electrical parts:

7 - Red LED Bicycle Tail Light Constant/Strobe Warning Light (dollar tree) (specific: Red LED Bicycle Tail Light Constant

Video example functioning Red LED Bicycle Tail Light Constant:

8 - 4 leds red (cyclotron)
9 - Electronic switch

Other items:

9 - Medication cup 3 pieces

10 - Oral dropper use 2 pieces

11 - Cable protection hose(Split loom tubing 1/2")

12 - Recycle Headphones

13 - Recycle Multiple cables the different electronics

Material Pack frame:

14 - Pvc 3/4"

15- Recycle School bags

Technic bend Pvc:

https://www.instructables.com/id/Bending-PVC-pipe-J...

https://www.instructables.com/id/Bend-PVC-Pipe/

Cut the carton according to the size of the containers I do not place the dimensions because everything depends on the size of the container they get.

But the objective is to create something very similar to what you see in the image use it as a guide.

You only need to make the holes for the LEDs in four centered positions and the center of the base of the plastic cups.

Use a permanent marker and first paint the red color of the base and finally the black see the image

Connect the 4 LEDs in parallel as shown in the diagram.

The motherboard of 5 leds is the powercell. The diagram of the effect of the saber only take out and accommodate the electronic buttons and battery see diagram.

Plans Proton pack

Print the plans of the gun

Used the technic to fold PVC and create same image and the strap the school bag stick with hot glue

Assemble and decorate,

- Paint the cardboard with the black color, I use the paint with blackboard for the texture

- Used the sticker paper to print image to decorate