Propeller for Homemade Wind Turbine

by JimmysLab in Workshop > Energy

22530 Views, 90 Favorites, 0 Comments

Propeller for Homemade Wind Turbine

14 - 2:41 μ.μ..jpg

PVC Tube

14 - 2:41 μ.μ..jpg
Take a pvc tube with about 10cm diameter and about 50cm length.

Cutting in Two

14 - 2:41 μ.μ..jpg
Cut the whole tube into 2 (on the half) so as to take 2 semicircular pieces.

Cutting in 4

14 - 2:41 μ.μ..jpg
Cut the 2 semicircular pieces on the half so as to have 4 long semicircular pieces.

Cut the Propeller

14 - 2:41 μ.μ..jpg
Now, draw and cut the propeller as you can see on the image.

Watch the Blueprint

14 - 2:41 μ.μ..jpg
You can see the draw so as to held yourself for better results.

Finishing

14 - 2:41 μ.μ..jpg
In the end, cut a circular piece of wood or steel on where the propeller will be placed. Use screws and some glue to make it stronger.