Project Uno - the Jamalam's First Attempt at a Ball Machine!

Hello everybody! This is my first attempt at a ball machine, I have built none ever before, and I used Darth trainman's instructables to help me, so some elements I give credit to Darth trainman for.

Pros

• Sort of piece ammount friendly
• 2 paths
• 2 towers
• Some elements!

Cons

• Some steps may be hard to follow, because I thought that if I broke it up too much, I couldn't put it back together again afterwards.
• May need editing for my low amounts of gears

Watch the avi video, also I had loadsa spare pieces on the floor =D watch out for my dodgy filming, though, and I had no motor on it at that time.

Have fun!

Nb. No piece count yet, because I am no good at them, can someone give me a piece count?Also, this ball machine can support at least 4 balls, i cannot test more because I don't have them :P

Green Rod: 146
White Rod: 121
Blue Rod: 202
Yellow Rod: 142
Red Rod: 74
Gray Rod: 35
TOTAL RODS: 712

Y Connector: 5
Tan Connector: 7
Green/Black Hinge: 1
Blue Hinge: 1
Dark Gray Connector: 82
Light Gray Connector: 6
Orange Connector: 72
Red Connector: 81
Green Connector: 8
Yellow Connector: 110
White Connector: 33
Purple 3D Connector: 136
Blue 3D Connector: 69
TOTAL CONNECTORS: 611

Large Yellow Gear: 2
Red Gear: 1
Medium Yellow Gear: 1
Gray Gear: 2
Blue Spacer: 1
Silver Spacer: 10
Chain Links: 63
Ball: 4
TOTAL OTHERS: 84

GRAND TOTAL: 1407

Try and build this, if you can't, then comment on the help step and I will postit in more detail.

This is for tower 1, again, if you need help comment on the last step

Just build this

Build this as you go

This is seriously the hardest part to build on the entire machine... I hope you don't believe me...

get at least 4 balls, i don't know how many it will support, but tell me.

Anyhow, add a motor to the red rod in the third picture, and it will work well. Send me a film!

Ask questions and I will try to answer them!