Project Painkiller

by Angry_Bert in Living > LEGO & K'NEX

1195 Views, 0 Favorites, 0 Comments

Project Painkiller

WP_20170101_11_40_35_Pro.jpg
WP_20170101_11_48_21_Pro.jpg
T8000spas.jpg
FH5E3O1G6MPBXKY.MEDIUM.jpg
WP_20170101_14_09_16_Pro[1].jpg

My favourite K'nex guns of all time are the Mepain's Knexsayer and KillerK's (Knex Lego Maniac) TR8. The TR8 for it's awesome performance and reliability, and the Knexsayer for it's under barrel pump and badassery.

I wanted to combine these 2 aspects in to one gun, which I named the (Me)PainKiller(K). It uses the tried and tested turret and front end mech from the TR8, with the frame and an updated trigger from the Knexsayer. I also removed the stock so I feel like Arnie (see pic), but it's personal preference.

The main reason I did this is I always had problems with the mech from the original knexsayer when adding a lot of bands. The knexsayer has a large distance between the pump and ram rod (see pics) which induces a lot of stress on the pump mechanism.

Credit goes to the original authors, as well as Loyamann123 for bringing the instructions for the Knexsayer to instructables! The idea of adding the TR-18 turret to the knexsayer also inspired this project.

Links to original guns:

https://www.instructables.com/id/Tr-Sayer-1/

https://www.instructables.com/id/TR8-2013-last-upda...

Front Brick

WP_20170101_12_05_47_Pro.jpg
WP_20170101_12_04_55_Pro.jpg
WP_20170101_12_05_39_Pro.jpg
WP_20170101_12_06_00_Pro.jpg
WP_20170101_12_05_23_Pro.jpg
WP_20170101_12_01_28_Pro.jpg

Front end Brick. Important to get this right. Start from the middle then build the sides.

Turret, Pump, Trigger Mech

WP_20170101_11_52_11_Pro.jpg
WP_20170101_11_59_10_Pro.jpg
WP_20170101_11_58_38_Pro.jpg
WP_20170101_12_02_50_Pro.jpg

Pump and turret from TR-8. Trigger mech slightly modified from Knexsayer.

Handle and Side Panels

WP_20170101_12_06_55_Pro.jpg
WP_20170101_12_07_13_Pro.jpg
WP_20170101_12_07_31_Pro.jpg
WP_20170101_12_01_16_Pro.jpg

Side panels and Handle are very close to original Knexsayer. See Loyamann's Tr Sayer for detailed instructions!

Assembly and Band Placement

WP_20170101_11_51_16_Pro.jpg
WP_20170101_11_52_57_Pro.jpg
WP_20170101_12_00_00_Pro.jpg
WP_20170101_12_01_01_Pro.jpg
WP_20170101_12_01_53_Pro.jpg
WP_20170101_12_01_07_Pro.jpg
WP_20170101_12_00_42_Pro.jpg
WP_20170101_11_43_42_Pro.jpg

Let me know what you think of the gun if you build it!

Thanks to Killerk, Mepain and Loyamann123 once again!