Programming With ESP-IDF Using Espressif IDE

In this video I've covered all the installation process of espressif IDE and I've told how to work on example templates.

Here I've taken hello world example template.

1. Espressif IDE : Here in this tutorial I've used Espressif IDE recommended by ESP. You can also use VS code with espressif ide extension or platformio extension. So it's up to you how you want to work
2. Docklight: This is a tool to see serial output from esp32 to PC, this is optional as espressif IDE itself has serial terminal, personally I prefer docklight as there are lot of option from hex view to decimal view of any string.

1. ESP32- WROOM-Kit: you required only one board for getting started with espressif IDE, here in this tutorial I'm using ESP32-WROOM kit, you can also go with esp32-wroover or esp32c3 mini board it will work for all the boards.

The whole project description is given in the above video.

If you have any doubt regarding this project feel free to comment us below. And if you want to learn more about embedded system you can visit our youtube channel

Please visit and like our Facebook Page for frequent updates.

Thanks & Regards,

Embedotronics Technologies