Printable LED Lamp

This is a printable LED lamp with WS2812 LEDs. They can be powered via USB, power supply or with an Arduino.

Follow me on Instagram for latest news
https://www.instagram.com/ernie_meets_bert/

Find all parts you need on Thingiverse.

https://www.thingiverse.com/thing:3511731

All parts are printed in PLA. The outer coil should be printed as vase-mode. The only part which needs support is the bottom. Print it in the orientation it is saved as.

Print a case of your desire

1x bottom (needs support)

1x bottom cover

1x inner coil

1x outer coil

1x top (print your preferred part)

1x base_polypanel (for polypanels from MakeAnything)

1x top_polypanel (for polypanels from MakeAnything)

Here is the list with all necessary parts for the LED lamp

1x LED strip (I recommend at least 2m)

1x Power Switch

6x M4 x 12mm screws

4x M3 x 6mm screws

Attach the power switch and the power plug to the bottom plate (If you want to power the lamp with a power supply). Otherwise you don't need them.

Use two M4 x 12mm flat head screws to mount the inner coil to the base plate.

As I wanted to power the lamp with a power supply, I unsoldered the USB cable and soldered the LED receiver to the power connector. Hereby I have a clean body.

Use the outer coil as a diffuser for the LEDs and put the top on you prefer.

You can secure the top with four M3 x 6mm screws.

Here you find the parts for the polypanel top

https://www.myminifactory.com/collection/collection-show/Matteo-/PolyPanels