Pressure Sensor & Servo Prototype

by kar58 in Circuits > Art

599 Views, 1 Favorites, 0 Comments

Pressure Sensor & Servo Prototype

Screen Shot 2019-11-12 at 7.27.32 PM.png

This prototype is set up for a wearable project. When the pressure sensor is activated the servos move in unison.

Supplies

  • 10k ohm resistor
  • (4) 9g Servos
  • Arduino Uno
  • Pressure Sensor
  • Jumper Wires
  • Breadboard

Set Up Your Breadboard

Diagram.png

Set Up Your Code

PrototypeCode.png

And upload it to your Arduino!

Downloads

PrototypeCode.ino

Begin Testing!

Pressure Sensor & Servo Prototype

Be sure to check your servo to pin connections and that they match up with your code!