Present's on Tinkercad

by Max 24 in Workshop > 3D Printing

760 Views, 2 Favorites, 0 Comments

Present's on Tinkercad

P-11.png

These presents are made on tinkercad. You can change the colors and mess around with them. This took me about 10 minutes to create all of them.

Box of the Present

P-1.png

First make a square 20x20x20. Then put the radius to 2.64. The color doesn't matter so you can choose the color.

Rapping Paper

P-2.png
P-3.png
P-4.png
P-5.png

Next duplicate one of the squares (to duplicate press Ctrl D). Next make 2 new squares that are holes. Put them on the side of it and group it together. For this I put mine white and sized it to 5.59 by 20.Next duplicate that and turn it 90 degrees.

Present

P-6.png
P-6a.png

Next group the Present and set the color to multicolor.

The Bow

P-7.png
P-8.png
P-9.png

Go to the scribble tool and make a half oval.Then make it White and Duplicate it and turn it as desired.

Putting the Present Together

P-10.png

Once you finish the bow group it all together. Thank you for your time I would appreciate it if you would give it a heart and leave a comment below.